Tork Craft | Scroll Saw Blades 7Tpi w/Pins 6Pc

Scroll saw blades pinned
Pinned blades 127mm (5″) for a scroll saw
Length:
127mm (5″) between pins
Tpi:
7
Pins:
Yes
The blades are manufactured to be used with
scroll saws.
There are various blade types available in the range with different teeth styles for different uses.
A minimum pilot hole of 4,7mm is required for cut-outs. Take a look at the chart below to select the correct blade for the recommended material and thickness.
Scroll saw blade selection chart
CODE
TPI
TOOTH
APPLICATION + MAX. MATERIAL THICKNESS
42401
18.5
Skip tooth
Very thin cuts in hard and soft woods. 19mm
40501
20
Regular
Thin cuts in hard and soft woods. 19mm
41001
7
Hook
Cut thick hard and soft wood. 51mm
41101
15
Regular
General-purpose blade for wood & plastic. 19mm
41201
10
Regular
Fast cutting of hard and soft woods. 19mm
42003
9/5
Skip tooth
Fast-cut blade with reversed teeth for wood. 19mm
42701
25
Regular
Fine cuts in aluminium, plastic, soft woods & veneer to 19mm
DEFINITION:
TPI – Teeth per inch. The number of teeth measured between 25,4mm
Note:
Some blades have reversed teeth for fast-paced cutting. Take care when using these blades as the blades can lift up your project from the scroll saw table when cutting.