Tork Craft | Polishing Pad 100mm Diamond Wet 500G Red

The Tork Craft wet diamond polish pads 100mm is for marble and granite, choose from 50-3000 Grit. Optimized for polishing marble, granite and stone. Recommended to use polishing machine, Tork Craft option POL 06
Ideal for both contractors and DIY users
Suitable for wet use
Hook & Loop back for fast pad change
Recommended Tork Craft backing pads SPC00117 100mm x M14 or SPC00118 100mm x 5/8UNC
Grit sizes available 50 / 150 / 300 / 500 / 1000 / 2000 / 3000
Guide for usage
Wear an apron, a gauze mask and safety glasses
Connect a backing pad to the polisher, and attach the polishing pad to the backing pad
Set the speed at 3000 – 4000 RPM and start the polishing process
Moving two passes across and one pass up and down is a good technique
Make sure all prior scratches are removed before moving onto a higher grit
Repeat the same process using all 7 pads to complete the polishing process
Polish from grit 50 – 3000 respectively. Do not skip.
If you want to achieve the best polishing results on granite or other natural stones, use Buff Pad as the last step
Wet the workpiece and run the Buff pad semi-wet with very low water
When the water is consumed, the process is complete
Repeat as necessary to improve the look and achieve the mirror effect result
Steps by pad:
Pad
Grit
1. Grey
50
2. Yellow
150
3. Orange
300
4. Red
500
5. Dark Green
1000
6. Green
2000
7. Pink
3000