Tork Craft | Digital Torque Wrench 1/2″ 17 -340Nm

1/2″ 17-340Nm Digital Torque Wrench
To loosen or tighten screws, bolts and nuts to a desired torque setting.
Handle: Plastic
Body: Steel
Grip: Rubber
LED indicator and LED Screen
Direction paddle
Buzzer
Vibration handle
Contents
Torque wrench
Communication cable
Batteries – 2 x AA
Compact disc
Battery compartment key
Specifications
Packaging Dimensions
L=680mm, W=126mm, T=60mm
Packaging Weight
2511.81g
Tool Weight
1469.59g
Tool Dimensions
L=650mm, W=42mm, T=41mm
Specifications
Square drive: 1/2”
Torque Range: 17-340Nm
Gears: 36
Accuracy: 2% Clockwise and 2.5% Counter
Clockwise
Min Resolution: ≤85Nm=0.01 & >85Nm =0.1
Max Operating range: 340Nm
Data Storage capacity: 100
WARNING
Do not apply torque in excess of the maximum capacity of the wrench
Apply load on the grip only and do not use any handle extension bars (a piece of pipe put over the grip) for additional leverage
Do not disassemble the wrench for any reason
Highly stressed internal components may cause severe injury when released in an unintended manner
The wrench should be re-calibrated periodically
The calibration of the wrench should be checked at least once a year, after any abnormal handling or overloading, or after 5000 cycles (“beeps)
Do not leave the wrench in any place exposed to excessive heat, humidity, or direct sunlight