Tork Craft | Carbon Steel Hole Saw 76mm

The carbon steel hole saw is covered with a black oxide finish to prevent rust
Holes can be quickly and efficiently drilled in wood, composite materials and plastic
Maximum depth of cut is 19mm
IMPORTANT:
Do not use the carbon steel hole saws for cutting into metal or steel
To use a hole saw, you will need the following accessories
A portable drill or stationary drill with a 3 jaw chuck
The correct mandrel and pilot drill for the material being drilled into
The necessary safety equipment; Safety goggles, gloves and hearing protection
IMPORTANT:
For the best results and for safety reasons, use the recommended rotation speed for the material being drilled into.
For longer hole saw life, use the following instructions
Use the correct mandrel for the diameter hole saw being used
Use the correct rotation speed. If the speed is too high or too low, it will have an effect on the cutting edge and decrease the life expectancy
Always apply the necessary pressure for the intended use
Keep the drill going straight to avoid binding the hole saw